new ICloverConnector()
- Source:
Methods
(static) ICloverConnector#acceptPayment(payment)
If Payment confirmation is required during a transaction due to a Challenge,
this method accepts the Payment. A Challenge may be triggered by a
potential duplicate Payment or an offline Payment. For more information,
see Working with Challenges.
Parameters:
| Name | Type | Description |
|---|---|---|
payment |
payments.Payment |
- Source:
Returns:
void
(static) ICloverConnector#acceptSignature(request)
If a signature is captured during a transaction, this method
accepts the signature as entered.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.VerifySignatureRequest |
- Source:
Returns:
void
(static) ICloverConnector#auth(authRequest)
Requests an Auth transaction. The tip for an Auth can be adjusted
through the TipAdjustAuth() call until the batch Closeout is processed.
Note: The MerchantInfo.SupportsAuths boolean must be set to true.
Parameters:
| Name | Type | Description |
|---|---|---|
authRequest |
remotepay.AuthRequest |
- Source:
Returns:
void
(static) ICloverConnector#capturePreAuth(capturePreAuthRequest)
Marks a PreAuth Payment for capture by a Closeout process. After a PreAuth is captured,
it is effectively the same as an Auth Payment.
Note: Should only be called if the request's PaymentID is from a PreAuthResponse.
Parameters:
| Name | Type | Description |
|---|---|---|
capturePreAuthRequest |
remotepay.CapturePreAuthRequest |
- Source:
Returns:
void
(static) ICloverConnector#checkBalance(request, request)
Check the balance on a card, if card supports balance inquiry
Parameters:
| Name | Type | Description |
|---|---|---|
request |
||
request |
remotepay.CheckBalanceRequest |
- Source:
Returns:
void
(static) ICloverConnector#closeout(closeoutRequest)
Sends a request to the Clover server to close out all transactions.
Note: The merchant account must be configured to allow transaction closeout.
Parameters:
| Name | Type | Description |
|---|---|---|
closeoutRequest |
remotepay.CloseoutRequest |
- Source:
Returns:
void
(static) ICloverConnector#discountAddedToDisplayOrder(discount, order)
Notify device of a discount being added to the order. The discount will then reflect in the displayOrder.
Note: This is independent of a discount being added to a display line item.
Parameters:
| Name | Type | Description |
|---|---|---|
discount |
order.DisplayDiscount | |
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#discountRemovedFromDisplayOrder(discount, order)
Notify device of a discount being removed to the order. The discount will then reflect in the displayOrder.
Note: This is independent of a discount being removed to a display line item.
Parameters:
| Name | Type | Description |
|---|---|---|
discount |
order.DisplayDiscount | |
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#displayReceiptOptions(request, request)
Display receipt options for a Credit, Refund, or Payment
Parameters:
| Name | Type | Description |
|---|---|---|
request |
The request details | |
request |
remotepay.DisplayReceiptOptionsRequest |
- Source:
Returns:
void
(static) ICloverConnector#dispose()
Disposes the connection to the Clover device. After this is called, the connection to the device is severed, and the
CloverConnector object is no longer usable. Instantiate a new CloverConnector object in order to
call initializeConnection().
- Source:
Returns:
void
(static) ICloverConnector#incrementPreAuth(incrementPreauthRequest)
Increases the total authorized amount of an open PreAuth by the amount increment passed into the request.
Parameters:
| Name | Type | Description |
|---|---|---|
incrementPreauthRequest |
remotepay.IncrementPreAuthRequest |
- Source:
Returns:
void
(static) ICloverConnector#initializeConnection()
Initializes the connection and starts communication with the Clover device.
This method is called after the connector has been created and
listeners have been added to it. It must be called before any other method
(other than those that add or remove listeners).
- Source:
Returns:
void
(static) ICloverConnector#invokeInputOption(io)
Sends a keystroke to the Clover device that invokes an input option (e.g. OK, CANCEL, DONE, etc.) on the customer's behalf.
InputOptions are in the CloverDeviceEvent passed to onDeviceActivityStart().
Parameters:
| Name | Type | Description |
|---|---|---|
io |
remotepay.InputOption |
- Source:
Returns:
void
(static) ICloverConnector#lineItemAddedToDisplayOrder(lineItem, order)
Notify device of a line item being added to the order. The line item will then reflect in the displayOrder.
Note: This is independent of a line item being added to a display line item.
Parameters:
| Name | Type | Description |
|---|---|---|
lineItem |
order.DisplayLineItem | |
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#lineItemRemovedFromDisplayOrder(lineItem, order)
Notify device of a line item being removed to the order. The line item will then reflect in the displayOrder.
Note: This is independent of a line item being removed to a display line item.
Parameters:
| Name | Type | Description |
|---|---|---|
lineItem |
order.DisplayLineItem | |
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#manualRefund(request)
Initiates a Manual Refund transaction (a "Refund" or credit that is not associated with a previous Payment).
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.ManualRefundRequest |
- Source:
Returns:
void
(static) ICloverConnector#openCashDrawer(request)
Opens the first cash drawer found connected to the Clover device. The reason for
opening the cash drawer must be set on OpenCashDrawerRequest.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.OpenCashDrawerRequest |
- Source:
Returns:
void
(static) ICloverConnector#preAuth(preAuthRequest)
Initiates a PreAuth transaction (a pre-authorization for a certain amount). This transaction
lets the merchant know whether the account associated with a card has sufficient funds,
without actually charging the card. When the merchant is ready to charge a final amount,
the POS will call CapturePreAuth() to complete the Payment.
Note: The MerchantInfo.SupportsPreAuths boolean must be set to true.
Parameters:
| Name | Type | Description |
|---|---|---|
preAuthRequest |
remotepay.PreAuthRequest |
- Source:
Returns:
void
(static) ICloverConnector#print(request)
Sends a print request using the PrintRequest object. Used to print
text, Bitmap image objects, and images from a URL using the specified
Clover-supported printer.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.PrintRequest |
- Source:
Returns:
void
(static) ICloverConnector#readCardData(request)
Requests card information (specifically Track 1 and Track 2 card data).
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.ReadCardDataRequest |
- Source:
- See:
-
- ICloverConnectorListener.onReadCardDataResponse(ReadCardDataResponse)
Returns:
void
(static) ICloverConnector#refundPayment(request)
Refunds the full or partial amount of a Payment.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.RefundPaymentRequest |
- Source:
Returns:
void
(static) ICloverConnector#registerForCustomerProvidedData(request)
Register an interest in receiving customer provided data.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.RegisterForCustomerProvidedDataRequest |
- Source:
Returns:
void
(static) ICloverConnector#rejectPayment(payment, challenge)
If Payment confirmation is required during a transaction due to a Challenge,
this method rejects the Payment. A Challenge may be triggered by a
potential duplicate Payment or an offline Payment. For more information,
see Working with Challenges.
Parameters:
| Name | Type | Description |
|---|---|---|
payment |
payments.Payment | |
challenge |
base.Challenge |
- Source:
Returns:
void
(static) ICloverConnector#rejectSignature(request)
If a signature is captured during a transaction, this method
rejects the signature as entered.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.VerifySignatureRequest |
- Source:
Returns:
void
(static) ICloverConnector#removeDisplayOrder(order)
Removes the DisplayOrder object from the Clover device's screen.
Parameters:
| Name | Type | Description |
|---|---|---|
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#resetDevice()
Sends a request to reset the Clover device back to the welcome screen. Can be used
when the device is in an unknown or invalid state from the perspective of the POS.
Note: This request could cause the POS to miss a transaction or
other information. Use cautiously as a last resort.
- Source:
Returns:
void
(static) ICloverConnector#retrieveDeviceStatus(request) → {Null}
Sends a message requesting the current status of the Clover device.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.RetrieveDeviceStatusRequest |
- Source:
Returns:
- Type
- Null
(static) ICloverConnector#retrievePayment(request)
Requests the Payment information associated with the externalPaymentId passed in.
Only valid for Payments made in the past 24 hours on the Clover device queried.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.RetrievePaymentRequest |
- Source:
- See:
-
- ICloverConnectorListener.onRetrievePaymentResponse(RetrievePaymentResponse)
Returns:
void
(static) ICloverConnector#retrievePendingPayments()
Retrieves a list of unprocessed Payments that were taken offline
and are pending submission to the server.
- Source:
Returns:
void
(static) ICloverConnector#retrievePrinters(request)
Queries available printers attached to the Clover device using the RetrievePrintersRequest object.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.RetrievePrintersRequest |
- Source:
- See:
-
- ICloverConnectorListener.onRetrievePrintersResponse(RetrievePrintersResponse)
Returns:
void
(static) ICloverConnector#retrievePrintJobStatus(request)
Queries the status of a print job.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.PrintJobStatusRequest |
- Source:
- See:
-
- ICloverConnectorListener.onPrintJobStatusResponse(PrintJobStatusResponse)
Returns:
void
(static) ICloverConnector#sale(request)
Requests a Sale transaction (purchase).
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.SaleRequest |
- Source:
Returns:
void
(static) ICloverConnector#sendMessageToActivity(request)
Sends a message to a Custom Activity running on a Clover device.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.MessageToActivity |
- Source:
- See:
-
- ICloverConnectorListener.onMessageFromActivity(MessageFromActivity)
Returns:
void
(static) ICloverConnector#setCustomerInfo(request)
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.SetCustomerInfoRequest |
- Source:
Returns:
void
(static) ICloverConnector#showDisplayOrder(order)
Displays an Order and associated line items on the Clover device. Will replace an Order that is
already displayed on the device screen.
Parameters:
| Name | Type | Description |
|---|---|---|
order |
order.DisplayOrder |
- Source:
Returns:
void
(static) ICloverConnector#showMessage(message)
Displays a string-based message on the Clover device's screen.
Parameters:
| Name | Type | Description |
|---|---|---|
message |
String |
- Source:
Returns:
void
(static) ICloverConnector#showThankYouScreen()
Displays the thank you screen on the Clover device.
- Source:
Returns:
void
(static) ICloverConnector#showWelcomeScreen()
Displays the welcome screen on the Clover device.
- Source:
Returns:
void
(static) ICloverConnector#startCustomActivity(request)
Starts a Custom Activity on the Clover device.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.CustomActivityRequest |
- Source:
Returns:
void
(static) ICloverConnector#tipAdjustAuth(request)
Adjusts the tip for a previous Auth transaction. This call can be made
until the Auth Payment has been finalized by a Closeout.
Note: Should only be called if the request's PaymentID is from an AuthResponse.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.TipAdjustAuthRequest |
- Source:
Returns:
void
(static) ICloverConnector#vaultCard(cardEntryMethods)
Asks the Clover device to capture card information and request a payment token
from the payment gateway. The payment token can be used for future
Sale and Auth requests in place of the card details. The
merchant account must be configured to allow payment tokens.
Note: The MerchantInfo.SupportsVaultCards boolean must be set to true.
Note: If the cardEntryMethods param is null, the default values (CARD_ENTRY_METHOD_MAG_STRIPE,
CARD_ENTRY_METHOD_ICC_CONTACT, and CARD_ENTRY_METHOD_NFC_CONTACTLESS)
will be used.
Parameters:
| Name | Type | Description |
|---|---|---|
cardEntryMethods |
Number | must be an integer |
- Source:
Returns:
void
(static) ICloverConnector#voidPayment(request)
Voids a transaction.
Parameters:
| Name | Type | Description |
|---|---|---|
request |
remotepay.VoidPaymentRequest |
- Source:
Returns:
void